Aaronia is manufacturer of Handheld Spectrum Analyzers, EMC & Pre-Compliance Antennas, USB Analysers, Near Field Probes and EMF Shieldings.

They offer the following Spectrum Analyzers:

• RF Spectrum Analyzer up to 9,4GHz
• EMF Spectrumanalyzer up to 30MHz
• USB Spectrum Analyser
• Outdoor Spectrum-Analyser
• EMC-Analyzer (DC to 9,4GHz)
• Broadband RF Preamplifier

Contact us direct on +31 (0)172-44 60 61 for more information on the Aaronia equipment.

Aaronia

Handheld Spectrum Analyzers

Besides Spectrum Analyzers Aaronia offers a variety of EMC & EMI Test-Antennas:

• Directional Antenna up to 18GHz
• Active Directional Antenna
• Biconical Antenna (20MHz-6GHz)
• Near Field Probes & RF Sniffer
• EMI & EMC Antenna (20MHz-18GHz)
• Isotropic (3D) Antenna

Contact our salesteam for more information. Our direct phonenumber is: +31 (0)172-44 60 61.

Aaronia

EMC & EMI Test Antennas

The SG380 Series RF Signal Generators use a unique, innovative architecture (Rational Approximation Frequency Synthesis) to deliver ultra-high frequency resolution (1 µHz), excellent phase noise, and

versatile modulation capabilities (AM, FM, ØM, pulse modulation and sweeps).

The standard models produce sine waves from DC to 2.025 GHz (SG382), 4.05 GHz (SG384) and 6.075 GHz (SG386). There is an optional frequency doubler (Opt. 02) that extends the frequency range of the SG384 and SG386 to 8.10 GHz. Low-jitter differential clock outputs (Opt. 01) are available, and an external I/Q modulation input (Opt. 03) is also offered. For demanding applications, the SG380 Series can be ordered with a rubidium timebase (Opt. 04).

The SG380 Series Signal Generators have two front-panel outputs with overlapping frequency ranges. A BNC provides outputs from DC to 62.5 MHz with adjustable offsets and amplitudes from 1 mV to 1 Vrms into a 50 Ω load. An N-type output sources frequencies from 950 kHz to 4.05 GHz with power from +13 dBm to ‑110 dBm (amplitude from 1 Vrms to 0.707 µVrms) into a 50 Ω load.

The SG380 Signal Generators offer a wide variety of modulation capabilities. Modes include amplitude modulation (AM), frequency modulation (FM), phase modulation (ΦM), and pulse modulation. There is an internal modulation source as well as an external modulation input. The internal modulation source produces sine, ramp, saw, square, and noise waveforms. An external modulation signal may be applied to the rear-panel modulation input. The internal modulation generator is available as an output on the rear panel.

Unlike traditional analog signal generators, the SG380 Series can sweep continuously from DC to 62.5 MHz. And for frequencies above 62.5 MHz, each sweep range covers more than an octave.

Stanford Research Systems - SRS

SG380 series RF Signal Generators

RF signal generator compact in size and with unbeatable value.

9 kHz to 3 GHz with 0.1 Hz resolution
-127 to +13 dBm output power
20 Hz-80 kHz low frequency output
Optional 40 MHz I/Q modulator
List/step swept output
Modulation: AM, FM, FM, pulse modulation
USB connectivity

Agilent Technologies

N9310A RF signal generator

The N9320B basic bench-top spectrum analyzer is an enhancement over N9320A. It gets a new all-digital IF that provides improved amplitude accuracy and repeatability.

Like in the most expensive spectrum analyzers in Agilent's portfolio, digital IF technology eliminates the sensitive resolution bandwidth filter and detector section that is prone to drift and linearity problems. Like the N9320A, the N9320B will offer class-leading performance from 9 kHz to 3 GHz, with a low noise floor and fast test speed. Optional pre-amplifier, tracking generator and AM/FM demodulation metric add even more measurement capability. Modern connectivity rounds out the picture, with USB and LAN as standard configuration. The N9320B will be popular for general use on the R&D bench as well as on the production line.

Agilent Technologies

N9320B RF spectrum analyzer

The 4 GHz N9330B handheld cable and antenna tester finds its focus applications in measuring SWR, return loss, cable loss and locating faulty point in cable and antenna systems.

N9330B handheld cable and antenna tester provides 25 MHz to 4 GHz frequency range, covering the telecom frequency range of GSM, CDMA, PHS, Bluetooth, etc. It is widely used for wirless service providers, network operators and their contractors world-wide, who install, deploy, maintain and troubleshoot wirless communication systems.

Agilent Technologies

N9330B cable and antenna tester

Handheld spectrum analyzer with bright display, best-in-class performance and powerful features for testing in the field.

Powerful features: spectrogram, SEM, and AM/FM/ASK/FSK demodulation metric, USB power sensor
6.5” color display viewable in all conditions
Narrowest RBW and lowest DANL in its class
Lightweight and rugged with 4-hour battery life

Frequency range: 100 kHz to 3 GHz (tunable to 9 kHz)
Resolution bandwidth: 30 Hz to 1 MHz in 1-3-10 sequence
Third order intercept: +10 dBm at 200 kHz offset
Displayed average noise level: -144 dBm, with preamplifier
Sweep time: 10 ms minimum non-zero span

Agilent Technologies

N9340B handheld spectrum analyzer

A CSA spectrum analyzer with a perfect combination of performance, price, and portability.

Best-in-class usable dynamic range

Wide range of video bandwidths and adjustable sweep time for improved pulsed-signal measurements

2-hours of continuous battery operation (battery packs optional)

AM/FM demodulation, preamp, spectrogram

Built-in bridge for stimulus response measurement

Frequency range: 100 kHz to 3 or 6 GHz
Resolution bandwidth: 10 Hz to 5 MHz
Third order intercept: +18 dBm
Displayed average noise level: -156 dBm/Hz, with preamp on
Overall amplitude accuracy: ±0.5 dB

Agilent Technologies

N1996A CSA spectrum analyzer

The U2000 Series covers a power range of –60 dBm to +44 dBm and a frequency range of 9 kHz to 24 GHz.

Because these affordable sensors operate without power meters or external power adapters, they save bench space and simplify field work.

Each of the nine models that make up the Agilent U2000 Series is optimized for a specific frequency and power range. All include built-in triggering, which eliminates the need for external triggering modules when performing time-gated measurements or synchronizing with external instruments or events. They deliver up to 1000 readings/s in buffered mode and include a Hi-Speed USB 2.0 interface for quick plug-and-play setup.

Another key feature is the “internal zeroing” capability. Zeroing can be performed without disconnecting the sensor from the device under test, thereby reducing sensor wear and test time.

These sensors can be connected directly to a PC, or can be used with a variety of Agilent spectrum and network analyzers, enabling accurate average-power measurements. Bundled with Agilent’s newly updated N1918A Power Analysis Manager software, the U2000 Series is a simple and powerful solution with an enhanced user interface and multiple-graph views. Multichannel measurements can be easily configured and displayed.

Agilent Technologies

U2000 series USB-based power sensors