Agilent Technologies introduces a new line of handheld digital multimeters and extended the capabilities of its handheld LCR meters.

On the go, the U1230 Series DMMs provide features that simplify everyday tasks even when working in dark and noisy conditions. On the bench, the U1730C Series LCR meters extend the U1730B models with greater measurement accuracy, broader frequency coverage and wider test ranges.

The new U1231A, U1232A and U1233A models are 31/2-digit, 6,000-count DMMs designed for installation and maintenance work in electrical, HVAC and utility settings. In dark spaces or at night, a built-in flashlight lets the user illuminate the work area while making measurements. In noisy environments, the U1230 Series enhances continuity measurements with a unique combination of alerts: loud beeps and a blinking backlight display. These DMMs provide non-contacting AC voltage detection, helping users safely detect and avoid hot wires, and alerting them with beeping/blinking alerts. All models are housed in compact, ergonomic cases and have an easily accessible control dial.

The U1731C, U1732C and U1733C LCR meters let engineers and technicians perform quick, basic measurements at their convenience. Compared to earlier U1730B models, noteworthy enhancements include selectable test frequencies up to 100 kHz (U1733C) and 0.2 percent measurement accuracy. The U1730C Series also includes automatic component identification, which displays the device type and a detailed analysis of parameters such as total impedance, DC resistance and equivalent series resistance.

"We're constantly looking for new ways to simplify our customers' day-to-day work, whether they do it at a bench or in dark, noisy conditions," said Ee Huei Sin, vice president and general manager of Agilent's Basic Instrument Division. "As we continue to apply our long tradition of innovation to these instruments, we hope engineers and technicians will begin to retool their expectations of handhelds."

When you're carrying a DMM with the world's only OLED screen, you won't have to squint to be sure you're reading the measurements right. On the go or on the bench, you'll get crystal-clear viewing indoors, particularly in dark, off-angle situations.

Visualize the advantages:

• 160° wide viewing angle (only 140° for standard LCD)
• 2000:1 contrast ratio for brighter readings (only 15:1 ratio for standard LCD)
• High resolution 50,000-count display
• High DC voltage accuracy of 0.025%
• Comes with 20 MHz frequency counter and built-in square wave generator

On top of high-performance features and easy-to-use functions, the U1253B Digital Multimeter is priced to be easy on your pocket, too.

The U2741A DMM gives you an accurate 5.5 digits resolution. It offers a wide range of measurement functions and features despite its value price. The U2741A is capable of performing DC voltage, AC voltage, DC current, AC current, 2-wire resistance, 4-wire resistance, continuity, diode, frequency, and temperature measurement to meet the industrial needs.

The U2741A allows quick connection to the PC with Hi-Speed USB 2.0. The USB interface is also compliant with USBTMC 488.2 standards. You can easily connect the device using USB cable which makes the setup easy and hassle-free. This simple and easy-to-use device is ideal for design validation and educational teaching labs. Its robust design is also appropriate for manufacturing fi eld, use in consumer electronics and semiconductor.

More often than not, the calibration of process control parts requires simultaneous measurements with a DMM. With the U1401, you can carry two tools in one - and calibrate while you measure. Slip the U1401 in its sturdy carrying case and you''re ready to go.

Designed with process control calibration tasks or every day electronics benchtop needs, Agilent''s U1401 gives you the flexibility to source out constant current, constant voltage and square wave signals while allowing you to perform your digital multimeter tasks.

Main features:
Simultaneous signal generation and measurement
DC, AC and AC+DC voltage and current measurements
Constant current, constant voltage and square wave outputs
Bright Electroluminescence (EL) backlight with 5-digit LCD display
Percentage scale readout for 4-20mA or 0-20mA measurement
Frequency, duty cycle and pulse width measurement

Models U1271A and U1272A;
Shaped to fit, tailored to perform, built to last.

Water and dust resistant. Grip-friendly and feature-packed.
That's what you get with an Agilent U1270 series handheld DMM.

Designed especially to fulfill the needs of industrial handheld users today, Agilent has reinvented the industrial handheld DMM to provide:

Feature sets that meet traditional industrial requirements and improve productivity and safety

Better grip

Dust and water resistant casing (certified to IP 54)

Both visual and audible continuity indication in noisy environments

Easy access to fuse for simplified maintenance

Large knob and buttons

Easy connectivity to PC and internal memory for data logging

The key features of the U1230 Series handheld digital multimeters

- Built-in LED torchlight to illuminate test area
- Flashing backlight as additional visual alert during continuity tests in noisy areas
- Vsense to perform non-contact voltage detection (only in U1233A)
- Data logging capability (stores up to 10 readings)
- IR-to-USB connectivity to transfer data to PC for record

Whether it's dark, noisy or even dangerous, the U1230 Series Handheld digital multimeters keep you equipped with features that anticipate worst-case scenarios.

The ergonomic shaped handheld allows you to single-handedly illuminate the test area with a built-in flashlight while making measurements. You can select measurement function using the easily accessible rotary dial. Vsense performs non-contact voltage detection while continuity detection is made easy with the audible beeper alert and flashing backlight display. With the U1230 Series, you work better in the conditions you are in.

The U1730C Series handheld LCR meters now extend the measurement frequencies up to 100 kHz- a capability which is typically found only in benchtop meters. The meters offer auto identification, Ai capability which conveniently displays component type. You can also get measurements done faster and more efficiently with more detailed component analysis functions such as Z, ESR and DCR.

Key features: • 20,000 counts resolution • 0.2% basic accuracy • Wide LCR ranges with three to five selectable test frequencies (up to 100 kHz for U1733C) • Auto identification (Ai) automatically determines and displays component type and measurements • Detailed component analysis with DCR, ESR, Z, D, Q, and θ functions • Battery life of 16 hours/AC-powered • IR-to-USB connectivity for data logging to PC