Agilent 33500 Series of function/arbitrary waveform generators are the first in their class with 30 MHz sine, square and pulse waveforms and 250 MSa/s, 16-bit sampling with true point-by-point arbitrary waveforms.

The 33500 Series comes in 1- and 2-channel configurations with a large color display and embedded waveform builder. The 2-channel model has a flexible dual-channel mode with frequency and amplitude coupling, differential channels and combined output channels.

Key features

30 MHz sine, square, pulse bandwidth

250 MSa/s, 16-bit sampling rate for high time resolution arbitrary waveforms

True point-by-point arbitrary waveforms for more accurate representation of user defined waveforms 0.04% THD and <40 ps jitter for greater signal fidelity USB and LAN (LXI-C) standard for easy utilization and connecting A TCXO timebase standard, OCXO optional for ultrahigh stability

Agilent Technologies

33521A & 33522A series Function Generators

Agilent 33220A is a function, arbitrary waveform, and pulse generator in one instrument with very stable frequencies and low distortion. It also provides AM, FM, PM, FSK, and PWM modulation capabilities, sweep and burst modes, and a graphic display.

The Agilent 33220A function generator offers uncompromising performance for functions and waveforms. With 11 standard waveforms plus pulse and arbitrary waveforms - it is the most frequency stable and lowest distortion function generator in its class.

The front panel allows access to all the major functions with a single key or two. The knob or numeric keypad can be used to adjust frequency, amplitude, offset and other parameters. Internal AM, FM, PM, FSK, and PWM modulation make it easy to modulate the waveforms without the need for a separate source. Additional features include ramp, triangle, noise, DC waveforms, and pulses with variable edges and are all available standard.

IntuiLink Waveform Editor for the 33220A is an easy to use program that provides add-ins for additional arbitrary waveform features as well as for inputting data from a wide variety of Agilent Oscilloscopes including the 5000 series, 6000 series, 7000 series, Infiniium and the 548XX Infiniium series.

• Fully compliant to LXI Class C specification
• 20 MHz Sine and Square waveforms
• Pulse, Ramp, Triangle, Noise, and DC waveforms
• 14-bit, 50 MSa/s, 64 k-point Arbitrary waveforms
• AM, FM, PM, FSK, and PWM modulation types
• Linear & logarithmic sweeps and burst operation
• 10 mVpp to 10 Vpp amplitude range
• Graph mode for visual verification of signal settings
• Connect via USB, GPIB and LAN

Agilent Technologies

Waveform Generator - 33220A

Agilent 33250A at a Glance
The Agilent Technologies 33250A is a high-performance 80 MHz synthesized function generator with built-in arbitrary waveform and pulse capabilities. Its combination of bench-top and system features makes this function generator a versatile solution for your testing requirements now and in the future.

Convenient bench-top features

• 10 standard waveforms
• Built-in 12-bit 200 MSa/s arbitrary waveform capability
• Precise pulse waveform capabilities with adjustable edge time
• LCD color display provides numeric and graphical views
• Easy-to-use knob and numeric keypad
• Instrument state storage with user-defined names
• Portable, ruggedized case with non-skid feet

Flexible system features

• Four downloadable 64K-point arbitrary waveform memories
• GPIB (IEEE-488) interface and RS-232 interface are standard
• SCPI (Standard Commands for Programmable Instruments) compatibility

The 33250A is Agilent´s highest performance function generator, featuring 80 MHz bandwidth, arbitrary waveforms and pulse generation. The 33250A uses direct digital-synthesis techniques to produce stable accurate outputs on all waveforms down to 1 uHz. The 33250A can generate arbitrary waveforms with 12-bit vertical resolution, 64K memory depth, and a sample rate of 200 MSa/s. You can also store up to four 64K-deep arbitrary waveforms in non-volatile memory. A color graphical display makes quick work of setting up complex signals.

IntuiLink Waveform Editor for the 33250A is an easy to use program that provides add-ins for additional arbitrary waveform features as well as for inputting data from a wide variety of Agilent Oscilloscopes including the 5000 series, 6000 series, 7000 series, Infiniium 548XX and the Infiniium series.

Agilent Technologies

Waveform Generator - 33250A

Agilent 53131A frequency counter is our most popular two-channel counter with the ability to make frequency, frequency ratio, time interval and pulse measurements. An optional RF channel can be added to measure 3, 5, or 12.4 GHz.

The Agilent 53131A universal counter has the capability to do the job quickly and correctly from fast signal processing to automated limit tests.

With frequency resolution of 10 digits per second, 500 ps time interval resolution and a complete set of test and analysis features, the unit comes with two 225 MHz channels, and you can choose an optional third channel that measures up to 3 GHz, 5 GHz, or 12.4 GHz.

• Two 225 MHz input channels, plus optional third channel up to 12.4 GHz
• 10 digits per second, 500 ps time interval resolution
• GPIB Standard

Agilent Technologies

Waveform Generator - 53131A

Model CG635 2 GHz low-jitter clock generator

The CG635 generates extremely stable square wave clocks between 1 µHz and 2.05 GHz. The instrument's high frequency resolution, low jitter, fast transition times, and flexible output levels make it ideal for use in the development and testing of virtually any digital component, system or network.

Main features:

• Clocks from 1 µHz to 2.05 GHz
• Random jitter <1 ps rms
• 16 digits of frequency resolution
• 80 ps rise and fall times
• CMOS, PECL, ECL, LVDS, RS-485 outputs
• Phase control and time modulation
• PRBS for eye-pattern testing (opt.)
• OCXO and rubidium timebase (opt.)

Stanford Research Systems - SRS

CG635 - Synthesized Clock Generator

Digital Delay Generator / Pulse Generator: The DG535 Digital Delay and Pulse Generator provides four precisely-timed logic transitions or two independent pulse outputs.

The delay resolution on all channels is 5 ps, and the channel-to-channel jitter is less than 50 ps.Front-panel BNC outputs deliver TTL, ECL, NIM or variable level (-3 to +4 V) pulses into 50 W or high impedance loads. The high accuracy, low jitter, and wide delay range make the DG535 ideal for laser timing systems, automated testing, and precision pulse applications.

• Four independent delay channels Two fully-defined pulse channels
  
• 5 ps delay resolution
  
• 50 ps rms jitter
  
• Adjustable amplitude and offset
  
• Delays up to 1000 seconds
  
• 1 MHz maximum trigger rate
  
• Standard GPIB interface
  
• Optional ±32 V output

Stanford Research Systems - SRS

DG535 - Digital Delay Generators

Function Generator: The DS335 is a simple, low-cost, 3 MHz function generator designed for general benchtop or ATE applications.

Based on a Direct Digital Synthesis (DDS) architecture, the DS335 includes features not normally found in function generators in this price range.

• 1 µHz to 3.1 MHz frequency range
• 1 µHz frequency resolution
• Sine, square, ramp, triangle and noise
• Phase continuous frequency sweeps
• FSK modulation
• 10 Vpp into 50 Ohms
• RS-232 and GPIB interfaces (opt.)

Stanford Research Systems - SRS

DS335 - 3 MHz Function Generator

15MHz Function Generator / Arbitrary Waveform Generator: The DS340 is a 15 MHz function and arbitrary waveform generator based on Direct Digital Synthesis (DDS).

A combination of features, performance and low cost make the DS340 ideal for a variety of test and measurement applications.

• 1 µHz to 15.1 MHz frequency range
• 1 µHz frequency resolution
• Sine, square, ramp, triangle and noise
• Phase continuous frequency sweeps
• 16,300 point arbitrary waveforms
• FSK modulation
• Optional RS-232 and GPIB interfaces

Stanford Research Systems - SRS

DS340 - 15MHZ Function Generator

Function / Arbitrary Waveform Generator : The DS345 Function Generator is a full-featured, 30 MHz instrument that uses an innovative Direct Digital Synthesis (DDS) architecture.

It generates many standard waveforms with excellent frequency resolution (1 µHz), and has versatile modulation capabilities including AM, FM, Burst, PM and frequency sweeps. It also generates arbitrary waveforms with a fast 40 Msample/s update rate.

• 1 µHz to 30.2 MHz frequency range
• 1 µHz frequency resolution
• Sine, square, ramp, triangle and noise
• Phase continuous frequency sweeps
• AM, FM, burst and phase modulation
• 16,300 point arbitrary waveforms
• 10 MHz reference input
• Optional RS-232 and GPIB interfaces

Stanford Research Systems - SRS

DS345 - 30 MHz Function Generator

Low Distortion Function Generator: The performance of a low distortion analog source and the precision of direct digital synthesis (DDS) is combined in the DS360.

With less than 0.001 % total harmonic distortion (THD), 25 ppm frequency accuracy, and a broad range of features including sweeps and bursts, the DS360 is the ideal source for audio frequency applications.

• 10 mHz to 200 kHz frequency range
• <-100 dBc distortion (to 20 kHz)
• 20 µVpp to 40 Vpp output range
• Linear and log frequency sweeps
• 25 ppm frequency accuracy
• SPDIF/EIAJ and AES-EBU outputs
• Balanced and unbalanced outputs
• RS-232 and GPIB interfaces

Stanford Research Systems - SRS

DS360 - Function Generator

A selection of universal waveform generators offering superior performance and excellent value

These universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source.

• Choice of 1, 2 and 4 independent or linked channels
• 40 MS/s max. sampling speed
• 16 MHz function generator
• 10 MHz pulse generator
• Pulse train pattern generator
• Arbitrary waveforms of up to 65 k points
• Powerful modulation capabilities
• Built-in trigger generators
• Waveform Manager Plus for Windows® software
• Multiple standard waveforms recalled from internal memory
• RS-232 and GPIB interfaces

2 Channel, 40 MS/s arbitrary waveform generator and waveform manager plus software

Fluke

280 Series Waveform Generator

These universal waveform generators combine many generators in one instrument.
Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source.

The 290 series uses Direct Digital Synthesis techniques as well as variable clock sampling technology to provide a fully featured programmable function and arbitrary waveform capability.

The 291, 292 and 294 are 100 MS/s arbitrary waveform generators designed to handle real world requirements by test experts. These models can easily simulate complex signals while being easy to use, compact and affordable. On multi-channel units each channel can be operated fully independently, or multiple channels can be linked using simple or complex relationships.

Waveform Manager Plus software provides all the features needed for creation, manipulation and management of arbitrary waveforms within a single Windows based program.

4 Channel
100 MS/s arbitary waveform generator and waveform manager plus software.
Compact Flash memory card and USB card reader/writer

Fluke

290 Series Waveform Generator

The Fluke 397 dual channel arbitrary waveform generator breaks new ground in value. This high performance signal source features an unprecedented combination of vertical resolution, memory depth and sample rate.

125 MS/s high performance universal waveform generators

• Unprecedented combination of universal generator and synthesizer
• Versatile performance
• High resolution and wide frequency range
• Extremely good performance-to-price ratio

The dual-channel 397 systems breaks new ground in universal waveform generator design. With its unprecedented combination of universal generator and synthesizer, versatility, high resolution and wide frequency range, and extremely good performance-to-price ratio, the 397s offer a range of benefits that will facilitate work in many fields.

2 Channel, 125 MS/s Arbitrary Waveform Generator & ArbExplorer Software; includes instrument synchronization cable

Fluke

397 Universal Waveform Generator

The B+K Precision® 4084AWG and 4086AWG are high performance laboratory grade synthesized function generators with arbitrary capability. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms.

The generators produce high purity, low distortion sine waves up to 80 MHz, square waves up to 40 MHz and a stable output of very small signals down to the 1mV - 10mV range.

The instrument also provides a built-in 100 MHz Universal Counter with frequency measurement and totalise function. Unmatched affordability and excellent performance make models 4084AWG & 4086AWG a perfect fit for many applications in Electronic Test and Design, Sensor Simulation and Education and Training.

• DDS function generator
• Max frequency 20 MHz/ 80 MHz
• Arbitrary mode: 16k memory, 10 bit, 200Ms/s
• 27 built-in standard and complex (arbitrary) waveforms
• Variable amplitude offset and symmetry
• Lin and log sweep
• AM, FM, FSK, PSK modulation (internal and external)
• Various Triggered modes
• VFD display
• 100MHz external frequency counter
• RS-232 interface (SCPI)

Sefram

BK4084/6